See: Description
| Class | Description |
|---|---|
| AddHostToHostIntentCommand |
Installs host-to-host connectivity intent.
|
| AddMultiPointToSinglePointIntentCommand |
Installs connectivity intent between multiple ingress devices and a single egress device.
|
| AddPointToPointIntentCommand |
Installs point-to-point connectivity intents.
|
| AddProtectedTransportIntentCommand |
Installs ProtectedTransportIntent.
|
| AddSinglePointToMultiPointIntentCommand |
Installs connectivity intent between a single ingress device and multiple egress devices.
|
| AddTestFlowsCommand |
Installs bulk flows.
|
| AddTunnelCommand |
Installs intent domain tunnel primitive.
|
| AllocationsCommand |
Lists allocated resources.
|
| AnnotateDeviceCommand |
Annotates network device model.
|
| AnnotateLinkCommand |
Annotates network link model.
|
| AnnotatePortCommand |
Annotates network device port model.
|
| ClusterDevicesCommand |
Lists devices of the specified topology cluster in the current topology.
|
| ClusterIdCompleter |
Cluster ID completer.
|
| ClusterLinksCommand |
Lists links of the specified topology cluster in the current topology.
|
| ClustersListCommand |
Lists all clusters in the current topology.
|
| ConfigureLinkCommand |
Add Link configuration.
|
| ConnectivityIntentCommand |
Base class for command line operations for connectivity based intents.
|
| ConnectPointCompleter |
ConnectPoint completer.
|
| CounterCommand |
Command to display the current value of a atomic counter.
|
| CountersListCommand |
Command to list the various counters in the system.
|
| DeviceControllersCommand |
Sets role of the controller node for the given infrastructure device.
|
| DeviceIdCompleter |
Device ID completer.
|
| DeviceInterfaceAddCommand |
Configures a device interface.
|
| DeviceInterfaceRemoveCommand |
Removes an interface configurion from a device.
|
| DeviceInterfacesListCommand |
Lists all interfaces or interfaces of a device.
|
| DeviceKeyAddCommand |
Adds a device key.
|
| DeviceKeyListCommand |
Lists all device keys.
|
| DeviceKeyRemoveCommand |
Removes a device key.
|
| DevicePortsListCommand |
Lists all ports or all ports of a device.
|
| DevicePortStateCommand |
Administratively enables or disabled a port on a device.
|
| DevicePortStatsCommand |
Lists port statistic of all ports in the system.
|
| DeviceRemoveCommand |
Removes an infrastructure device.
|
| DeviceRoleCommand |
Sets role of the controller node for the given infrastructure device.
|
| DeviceSetControllersCommand |
Sets role of the controller node for the given infrastructure device.
|
| DevicesListCommand |
Lists all infrastructure devices.
|
| DomainIdCompleter |
Domain ID completer.
|
| DpisListCommand |
Fetches DPI statistics list.
|
| DriverNameCompleter |
Device driver name completer.
|
| DriverProvidersListCommand |
Lists device drivers.
|
| DriversListCommand |
Lists device drivers.
|
| EdgePortsListCommand |
Lists all edge ports.
|
| EncapTypeCompleter |
Encapsulation type completer.
|
| EthTypeCompleter |
Ethernet type completer.
|
| ExtHeaderCompleter |
IPv6 extension header completer.
|
| FlowObjectiveCompositionCommand |
Manages FlowObjectiveComposition policy.
|
| FlowObjectiveNextListCommand |
Returns a mapping of FlowObjective next-ids to the groups that get created
by a device driver.
|
| FlowObjectivePendingNextCommand |
Returns a list of FlowObjective next-ids waiting to get created by device-drivers.
|
| FlowObjectiveQueueClearCommand |
Clear flow objective that are waiting for the completion of previous objective with the same key.
|
| FlowObjectiveQueueListCommand |
Displays flow objective that are waiting for the completion of previous objective with the same key.
|
| FlowRuleStatusCompleter |
Flow rule status completer.
|
| FlowsListCommand |
Lists all currently-known flows.
|
| GetDomainsCommand |
Gets the complete list of domain IDs.
|
| GetFlowStatisticsCommand |
Fetches flow statistics with a flow type and instruction type.
|
| GetStatisticsCommand |
Fetches statistics.
|
| GlobalLabelApplyCommand | |
| GlobalLabelCommand | |
| GlobalLabelPoolCreateCommand |
create label resource pool by specific device id.
|
| GlobalLabelPoolDestroyCommand | |
| GlobalLabelReleaseCommand | |
| GroupsListCommand |
Lists all groups in the system.
|
| GroupStatusCompleter |
Group status completer.
|
| GroupTypeCompleter |
Group status completer.
|
| HostIdCompleter |
Host ID completer.
|
| HostRemoveCommand |
Removes an end-station host.
|
| HostsListCommand |
Lists all currently-known hosts.
|
| Icmp6CodeCompleter |
ICMPv6 type completer.
|
| Icmp6TypeCompleter |
ICMPv6 type completer.
|
| IntentCycleCommand |
Installs point-to-point connectivity intents.
|
| IntentDetailsCommand |
Displays details about an Intent in the system.
|
| IntentKeyCompleter |
Intent Key completer.
|
| IntentListCompilers |
Lists the inventory of intents and their states.
|
| IntentListInstallers |
Lists the installers of intents.
|
| IntentPurgeCommand |
Purges all WITHDRAWN intents.
|
| IntentPushTestCommand |
Installs bulk point-to-point connectivity intents between given ingress/egress devices.
|
| IntentRemoveCommand |
Removes an intent.
|
| IntentsDiagnosisCommand | |
| IntentsListCommand |
Lists the inventory of intents and their states.
|
| InterfaceAddCommand |
Adds a new interface configuration.
|
| InterfaceRemoveCommand |
Removes an interface configuration.
|
| InterfacesListCommand |
Lists all configured interfaces.
|
| IpProtocolCompleter |
IP protocol completer.
|
| LabelApplyCommand | |
| LabelPoolCreateCommand |
create label resource pool by specific device id.
|
| LabelPoolDestroyCommand | |
| LabelReleaseCommand | |
| LabelResourceCommand | |
| LayoutAddCommand |
Add a new UI layout.
|
| LayoutListCommand |
List layout details.
|
| LeaderCommand |
Prints the leader for every topic.
|
| LinkDstCompleter |
Link destination end-point completer.
|
| LinksListCommand |
Lists all infrastructure links.
|
| LinkSrcCompleter |
Link source end-point completer.
|
| MapsListCommand |
Command to list the various maps in the system.
|
| McastDeleteCommand |
Deletes a multicast route.
|
| McastGroupCompleter |
Mcast group Completer.
|
| McastJoinCommand |
Installs a source, multicast group flow.
|
| McastRoutesListCommand |
Displays the source, multicast group flows entries.
|
| McastShowCommand |
Displays the source, multicast group flows entries.
|
| MeterAddCommand |
Add a meter to a device.
|
| MeterRemoveCommand |
Remove existing meter from device.
|
| MetersListCommand |
Lists all meters.
|
| NeighbourHandlersListCommand |
Lists neighbour message handlers.
|
| PacketProcessorsListCommand |
Lists packet processors.
|
| PacketRequestsListCommand |
Lists packet requests.
|
| PartitionsListCommand |
Command to list the database partitions in the system.
|
| PathListCommand |
Lists all shortest-paths paths between the specified source and
destination devices.
|
| PipeconfCommand |
Query registered pipeconfs.
|
| PortNumberCompleter |
PortNumber completer, which returns candidates in
PortNumber.toString() form. |
| PortQueryVlansCommand |
Command to show the list of unused vlan-ids.
|
| PortStateCompleter |
PortState completer.
|
| QueuesListCommand |
Command to list stats for all work queues in the system.
|
| RandomIntentCommand |
Installs bulk host-to-host intents between hosts of the network.
|
| RegionAddCommand |
Add a new region.
|
| RegionAddDevicesCommand |
Add a set of devices into existing region.
|
| RegionAddPeerLocCommand |
Annotate a region with a peer location.
|
| RegionIdCompleter |
Region ID completer.
|
| RegionListCommand |
List Region details including membership.
|
| RegionRemoveCommand |
Removes a region from the existing region list.
|
| RegionRemoveDevicesCommand |
Remove a set of devices from existing region.
|
| RegionTypeCompleter |
Region type completer.
|
| RegionUpdateCommand |
Update an existing region.
|
| ResourcesCommand |
Lists registered resources.
|
| RoleCompleter |
Device mastership role completer.
|
| TableStatisticsCommand |
Lists port statistic of all ports in the system.
|
| TestAllocateResource |
Test tool to allocate resources.
|
| TestProtectionEndpointIntentCommand |
Test tool to add ProtectionEndpointIntent.
|
| TopologyCommand |
Lists summary of the current topology.
|
| TransactionsCommand |
CLI to view in-progress database transactions in the system.
|
| TunnelBorrowCommand |
Borrows tunnels.
|
| TunnelCreateCommand |
Supports for creating a tunnel by using IP address and optical as tunnel end
point.
|
| TunnelQueryCommand |
Supports for querying tunnels.
|
| TunnelQuerySubscriptionCommand |
Query all tunnel subscriptions of consumer by consumer id.
|
| TunnelRemoveCommand |
Supports for removing tunnels.
|
| TunnelReturnCommand |
Returns tunnels.
|
| TunnelUpdateCommand |
Supports for updating a tunnel by tunnel identity.
|
| WipeOutCommand |
Wipes-out the entire network information base, i.e.
|
| Enum | Description |
|---|---|
| EthType |
Allowed values for Ethernet types.
|
| ExtHeader |
Known values for IPv6 extension header field that can be supplied to the CLI.
|
| Icmp6Code |
Known values for ICMPv6 code field that can be supplied to the CLI.
|
| Icmp6Type |
Known values for ICMPv6 type field that can be supplied to the CLI.
|
| IpProtocol |
Known protocol values for IP protocol field that can be supplied to the CLI.
|